Electrical Fault Finding in Inner West Sydney
Power keeps tripping? Lights flickering? Half the house just went dark? Electrical faults have a way of turning up at the worst time, and they’re not something to leave and hope for the best.
Inner West Electrical Solutions finds the cause, fixes it properly and explains what went wrong in plain English. Based in Rozelle, Chris and the team look after homes right across Sydney’s Inner West, from old terraces to new renovations.
How can we help you?
Finding the Fault From the Symptom
A tripping safety switch or a dead power point is usually a sign of something else going on. It might be a faulty appliance, a loose connection, water getting into an outdoor power point, or old wiring that’s simply worn out.
Resetting the switch might get the power back on for now, but the problem tends to come back. We track down what’s actually causing it, so you’re not stuck resetting the switchboard every other night.
How We Can Help

Power keeps tripping
If your safety switch or circuit breaker keeps cutting the power, we'll work out why. It could be one appliance, moisture in a cable, or a circuit that's being asked to do too much.

Part of the house has no power
One room or half the house without power usually means a fault on that circuit. We find it, fix it and get things running again.

Flickering or dimming lights
Sometimes it's just a tired light fitting. Other times it's a loose connection behind the scenes. Either way, we'll check it and make it safe.

Power points and switches not working
Dead power points, switches that feel warm, or plates that look scorched or discoloured all need a look. We'll repair or replace them.

Burning smells or buzzing sounds
A hot plastic smell or a buzzing noise from a power point or the switchboard is a warning sign. We'll find where it's coming from and sort it out.

Old wiring and switchboards
Lots of Inner West homes still have older wiring or ceramic fuses. If that's behind your problem, we'll explain your options, including whether a switchboard upgrade makes sense.
A clear answer and a proper fix Once we know what’s wrong, we tell you what we found, what it’ll take to fix and what it’ll cost before we start.
Why Electrical Faults Are Dangerous
Electrical faults don’t always look serious. A light that flickers now and then or a safety switch that trips once a week is easy to ignore. But the cause behind it, like a loose connection or damaged wiring, can heat up over time. That’s how electrical fires start, often hidden inside walls or ceilings where you can’t see them.
Faults can also put people at risk of electric shock, damage your appliances and leave you without power when you need it most. Older homes are especially worth keeping an eye on, as wiring that’s been in the walls for decades can wear down without any obvious signs.
Signs You Should Call an Electrician to Fix Electrical Faults
- Your safety switch or circuit breaker keeps tripping
- Part of the house has lost power
- Lights flicker, dim or buzz
- Power points or switches feel warm or look scorched
- You can smell burning or hot plastic
- You hear buzzing or crackling from a power point or the switchboard
- You feel a tingle or small shock from a tap, appliance or switch
- Power points have stopped working
- Your home still has old ceramic fuses
If you see smoke, sparks or flames, get out and call 000. If you feel a tingle from a tap or anything metal, stop using it and call Ausgrid on 13 13 88, then give us a ring. For anything else on this list, switch off the affected circuit at the switchboard if it’s safe to do so, and call us on 0414 826 555.
Why Choose Us for Electrical Fault Finding in the Inner West
We’re a local family-run business based in Rozelle, so we know the area and the homes in it. With over 20 years of electrical experience in the Inner West, the owner Chris, has worked on everything from fragile wiring in heritage terraces to tripping issues in newly renovated apartments. That local know-how means we can usually track down the problem faster, which saves you time and money.
We keep things simple, providing a clear explanation of what’s wrong and how we’ll fix it.

Licensed and insured
Electrical Contractor Licence No. 170143C

Done to standard
All work meets the Australian Wiring Rules (AS/NZS 3000), and you'll get a compliance certificate (CCEW) where it's required

Tidy and on time
We turn up when we say we will and clean up when we're done
120+ five-star Google reviews from Inner West locals
Electrical Fault Finding Across the Inner West
Not sure if we cover your street? Give Chris a call.
Frequently Asked Questions
Why does my safety switch keep tripping?
Can a faulty appliance cut the power?
Why do my lights flicker?
Why has one room lost power but the rest of the house is fine?
That usually points to a fault on that circuit, like a damaged cable, a worn power point or a breaker that’s tripped. Check your switchboard first. If nothing’s tripped, or it won’t reset, give us a call.
Is a burning smell from a power point serious?
How do you find a fault that only happens sometimes?
Book Your Electrical Fault Finding Today
Don’t put up with tripping power, flickering lights or dead power points. Call Chris, your local Inner West electrician, for fast help and a proper fix.