Kinetic Switch Installation in the Inner West
Want a ceiling fan but been told it needs new switch wiring through your walls? A kinetic switch could be a simpler way to get there.
Inner West Electrical Solutions now installs kinetic switches for ceiling fans, lighting and other spots where running new cable is tricky. Where your home suits it, we use the existing power at the ceiling and add a wireless wall switch, so there’s less mess and less making good afterwards.
How can we help you?
What Is a Kinetic Switch?
A kinetic switch is a wireless wall switch that runs without batteries or cables. When you press it, the movement creates a small burst of energy, which is enough to send a signal to a receiver connected to your fan or light. You might also see them called revolution switches or self-powered switches.
It looks and works like a normal wall switch. The difference is what’s behind it, which is nothing. No cable has to be run from the switch down through the wall.
Why Kinetic Switches Suit Ceiling Fans and Lighting
In a lot of older Inner West homes, adding a ceiling fan or new light installations usually means getting into walls or ceilings, running a new switch cable, then patching, painting and cleaning up. In some rooms that’s hard to do, or not practical at all.
With a kinetic switch, your electrician can often use the existing power at the ceiling and fit a receiver to the fan or light. The wireless switch then goes on the wall where you want it.
- Less disruption: often no need to open up walls or ceilings
- Less making good: fewer holes to patch and paint
- More options: fans and lights may be possible in spots that were ruled out before
- Feels familiar: you use it like any other wall switch
Whether kinetic switches will work in your home depends on the existing wiring, ceiling access and the room itself. We’ll check all of that before recommending it.
Other Ways to Use Kinetic Switches
Beyond ceiling fans and lights, kinetic switches can also help with:
- Under-bench lighting in kitchens
- Hard-to-reach spots where new wiring would be difficult or close to impossible
- Apartments and units where cutting into walls isn’t ideal
- Renovations where you’d rather keep finished walls intact
Kinetic Switch Installation by an Electrician: What's Involved
Check the space
We look at your existing ceiling power, the room and where you'd like the switch to go. If it's not the right fit for your home, we'll let you know and talk you through other options.
Supply the parts
We source the kinetic switch and receiver through our supplier. It's a product we've used and trust. Electrical products sold in Australia should carry the RCM mark, which shows they meet Australian safety requirements.
Install and pair
Your electrician fits the receiver at the ceiling, connects the fan or light, mounts the kinetic switch and pairs the two. All work is done to the Australian Wiring Rules (AS/NZS 3000), which every NSW electrician must follow.
Test and certify
Once the work is tested, NSW rules require your electrician to lodge a Certificate of Compliance for Electrical Work (CCEW) with Building Commission NSW within 7 days. You'll receive a copy for your records.
Is a Kinetic Switch Right for Your Home?
Wireless switching is catching on in homes, and it’s easy to see why. It’s a small upgrade that adds everyday convenience, without the cost and mess of opening up walls. We’ve installed a number of these systems and they’ve worked well for our clients. They tend to suit established homes, apartments and renovations where you want to keep disruption down.
This setup also offers two practical benefits. With no cable to run, you can often add a second switch to control the same fan, say one by the bed and one at the door, so you’re not getting up to turn it off. And because there’s no wall cutting, there’s usually no need for a plasterer or painter afterwards, which can mean a quicker job and fewer trades through your home.
Every home is different, so pricing depends on what’s involved. In many cases it can work out more affordable than running new switch wiring and making good afterwards. We’ll take a look and give you a quote before any work starts.
We Service All Areas Across Inner West Sydney
We provide kinetic switch installation services for residential and commercial properties throughout the Inner West. No matter where you are based, our local electricians are always nearby to assist.
- Annandale
- Ashbury (part)
- Ashfield
- Balmain
- Balmain East
- Birchgrove
- Camperdown
- Croydon
- Croydon Park
- Dobroyd Point
- Drummoyne
- Dulwich Hill
- Enmore
- Forest Lodge
- Glebe
- Haberfield
- Hunters Hill
- Hurlstone Park
- Leichhardt
- Lewisham
- Lilyfield
- Marrickville
- Newtown
- Petersham
- Rozelle
- Ryde
- St Peters
- Stanmore
- Summer Hill
- Sydenham